Home » Electronics » Arduino Memory

Arduino Memory


As I have been exploring the Arduino hardware platforms for my TBD project, I find myself forgetting the memory options available.  I’m recording here my findings so I can reference it later.






Nano 2.3


16K bytes

1024 bytes

512 bytes

Nano 3.0


32K bytes

2048 bytes

1024 bytes



32K bytes

2048 bytes

1024 bytes

Mega 2560


256K bytes

8192 bytes

4096 bytes

    • SRAM (Static Random Access Memory) is where the sketch creates and manipulates variables when it runs.
    • EEPROM (Electrically Erasable Programmable Read-Only Memory) is memory space that programmers can use to store long-term information.
    • Flash memory is where the Arduino sketch is stored (program space).  The bootloader takes about 2 KB of flash memory and remaining space is for the sketch.

The Arduino IDE will tell you exactly how much Flash is being used after each compile/upload.  EEPROM is an older, more reliable technology. It is somewhat slower than Flash.  In Flash, a large block is erased all at once, much faster than the EEPROM method of going cell-by-cell.

If you don’t need to modify the strings or data while your sketch is running, you can store them in Flash (program) memory instead of SRAM; to do this, use the PROGMEM keyword.

Part of my interest in the Arduino’s memory is my concern about how much memory a sketch uses.  Here are some sites that provide insight and algorithms for calculating the memory:


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: